Bench saws for marble shop with single beam

These saws have been designed and built to be efficient, accurate, versatile and therefore suitable for small and medium marble workshop for the processing of each type of material, from cutting to milling by simply replacing the tool according to the specific material. (Marble, granite, porcelain tile). For this specific market they are very attractive because of several kind of jobs that you can do with low cost.

• The saw head with cutting blade is sliding along a structural steel beam by means of roller skates giving solidity to the machine and cutting precision;
• The transmission is by toothed belt; on versions AVS it is done manually by hand wheel positioned on the right side of the machine while on AAS version is motorized with speed adjustment by inverter, all controlled by an electrical panel always positioned on the right side;
• The fall & rise of cut is adjusted by a hand wheel positioned on the upper part of the saw head; upon request on the AAS versions only can be motorized with gear box;
• The working bench is made in marine plywood and is interchangeable.

With the saws AVS and AAS series can be made tilting cuts by rotating the saw head. On versions manuals AVS this kind of action is made by a lever located on the right side of the machine that you can lock onto any position from 0 to 45 ° degrees; on the AAS versions rotating system is made through the gear box installed, very precise and that allows to have more positions from 0 to 90 ° allowing it to also perform cuts / etchings into horizontal and milling of slabs.
Inside of the tank there is a water pump with water circulation system who permit the cooling of the disc / tool.

The big advantage of the ITC AVS / AAS saws is that with a small investment, you can buy a professional machine essential for your job.

The saws series ITC AVS / ITC AAS so in addition to the good performance and production efficiency, easy maintenance and excellent stability, are 100% manufactured in Italy and placed on the market at highly competitive prices.

All our saws ITC AVS / ITC AAS compared to the competitors have the following advantages:

• Sliding of the saw head along a beam in rigid structural steel having no flexion by means of roller skates with ball recirculation. This system allows to perform absolutely precise cuts.
• The ITC AAS series are suitable to perform cuts / etchings in the horizontal (90 °) in addition to milling of the slabs. By specific kit supplied optionally you can also perform drilling.
• Excellent convenience between price and performance offered by the machine
• 2 Warranty years on all mechanical components

All machines are supplied with n. 1 side roller table100x50 Cm., Side stop support, fenche.

ITC Italian Top Class is a leading company in the field of small and medium equipment for marble offering inside of his catalog a wide range of saws and cutters of various sizes and specifications for all kind of jobs.

Thanks to a careful study of this market segment by our sales department the lines Sawing ITC AVS / ITC AAS are having a great success; this is also due to the excellent quality / price and performance that this article provides.

One of the most attractive versions in the have been the saw ITC 1500AVS and ITC 1500AAS, among the most requested by our customers; This is because besides to the technical features and use described above these saws are placed in an intermediate dimension between the most widely used for space issues and practicality.

Available models:

ITC 1200AVS: Bench saw with manual feed, cutting length 120 Cm. In 230V single phase, 2.2 Kw, max. blade Ø 350 mm.

ITC 1200AVS-T: Bench saw with manual feed, cutting length 120 Cm. In 400V three phase, 3 or 4 Kw, max blade Ø 350 mm.

ITC 1200AAS: Bench saw with automatic feed, cutting length 120 Cm. In 230V single phase, 2.2 Kw, max. blade Ø 350 mm.

ITC 1200AAS-T: Bench saw with automatic feed, cutting length 120 Cm. In 400V three phase, 3 or 4 Kw, max. blade Ø 350 mm.

ITC 1500AVS: Bench saw with manual feed, cutting length 150 Cm. In 230V single phase, 2.2 Kw, max. blade Ø 350 mm.

ITC 1500AVS-T: Bench saw with manual feed, cutting length 150 Cm. In 400V three phase, 3 or 4 Kw, max. blade Ø 350 mm.

ITC 1500AAS: Bench saw with automatic feed, cutting length 150 Cm. In 230V single phase, 2.2 Kw, max. blade Ø 350 mm.

ITC 1500AAS-T: Bench saw with automatic feed, cutting length 150 Cm. In 400V three phase, 3 or 4 Kw, max. blade Ø 350 mm.

ITC 2000AVS: Bench saw with manual feed, cutting length 200 Cm. In 230V single phase, 2.2 Kw, max. blade Ø 350 mm.

ITC 2000AVS-T: Bench saw with manual feed, cutting length 200 Cm. In 400V three phase, 3 or 4 Kw, max. blade Ø 350 mm.

ITC 2000AAS: Bench saw with automatic feed, cutting length 200 Cm. In 230V single phase, 2.2 Kw, max. blade Ø 350 mm.

ITC 2000AAS-T: Bench saw with automatic feed, cutting length 200 Cm. In 400V 3-phase, 3 or 4 Kw, blade max. Ø 350 mm.

This wide range has been so much required by our sales department who firmly believes in this market having behind over than thirty year experience in the marble field.

Our bench saws ITC AVS / ITC AAS are marked CE and are built and recommended for professional use only having all the necessary requirements. They are also guaranteed in all its mechanical parts for three years after their commissioning due to a high quality standard of the materials used in the construction.

One of the greatest strengths of saws ITC AVS / ITC AAS in addition to their versatility and cutting precision that ranks among the highest on the market is the excellent price / performance.

For more technical information you can download our technical catalog of the bench saws ITC AVS / ITC AAS